Metal Garage Consumer Unit — 63A RCD + 6A+16A MCBs | UKCA Certified

Metal Garage Consumer Unit — 63A RCD + 6A & 16A MCBs Pre-Fitted

The EMGU63616 is a pre-populated metal garage consumer unit supplied with a 63A 30mA RCD incomer, a 6A MCB and a 16A MCB factory-fitted and ready for immediate installation. This unit provides a complete, code-compliant distribution solution for standard garage and outbuilding electrical installations — covering a typical lighting circuit (6A) and a power/socket circuit (16A) with full earth leakage protection via the 30mA RCD incomer.

Constructed from powder-coated galvanised steel with a lockable hinged door, the unit meets BS 7671 (18th Edition) requirements for metal consumer unit enclosures in domestic premises. The 63A RCD provides 30mA personal protection across all circuits, while the pre-fitted MCBs are correctly rated for typical garage lighting and power circuits. Additional ways are available for future circuit expansion.

Key Features

• Pre-populated — 63A 30mA RCD incomer + 6A MCB (lighting) + 16A MCB (power) factory-fitted
• Ready to install — no need to source individual components; connect and go
• 63A RCD incomer with 30mA sensitivity — full earth leakage protection for all circuits
• Metal construction — powder-coated galvanised steel for fire resistance and durability
• Lockable hinged door — secure access with integrated door catch
• Spare ways available for future circuit expansion
• 35mm DIN rail, neutral bar and earth bar included
• UKCA certified — compliant with UK product safety regulations
• Ideal for garages, workshops, outbuildings and garden offices

Technical Specification

Compliance & Certification

• UKCA certified
• Metal enclosure as required by BS 7671 (18th Edition) Regulation 421.1.201
• 30mA RCD protection compliant with BS 7671 requirements for personal protection

Installation Notes

This consumer unit must be installed by a qualified electrician in accordance with BS 7671 (18th Edition). Always isolate the supply before installation. The RCD incomer and MCBs are pre-fitted — the installer only needs to connect the incoming supply tails and outgoing circuit cables. Mount the unit on a flat, non-combustible surface at a height between 450mm and 1350mm from finished floor level. The RCD test button should be operated at least quarterly after commissioning.